MODELLING OF PERMEABILITY CHARACTERISTICS OF SOILFLY ASH-BENTONITE CUT-OFF WALL USING RESPONSE SURFACE METHOD

Authors

  • Jonathan R. Dungca
  • Joenel G. Galupino

Keywords:

Permeability, Fly Ash, Bentonite, Waste Utilization, Environment

Abstract

In order to prevent the contamination the groundwater, by restricting the horizontal movement of
leachate, cut-off walls were recommended [1]. Currently, one of the factors in designing cut-off walls is to
provide efficient and relatively inexpensive means of containing contaminants. In order to obtain acceptable
permeability, it was suggested by Baxter [2] to provide a mix of 96% soil and 4% bentonite in the design of cutoff walls, but bentonite is relatively expensive, thus the viability of fly ash as a replacement for bentonite was
considered. Soil mixtures were proposed and rigorous laboratory tests were performed to determine the
individual properties of the said soil mixtures. Tests for specific gravity, soil index property, relative density,
microscopic characterizations, elemental composition and permeability were performed to garner data that were
utilized for the Response Surface Method Permeability models. The minimum permeability requirements for the
cut-off wall were achieved using various mixtures of soil-bentonite-fly ash.

Downloads

Published

2017-02-10

How to Cite

Jonathan R. Dungca, & Joenel G. Galupino. (2017). MODELLING OF PERMEABILITY CHARACTERISTICS OF SOILFLY ASH-BENTONITE CUT-OFF WALL USING RESPONSE SURFACE METHOD. GEOMATE Journal, 10(22), 2018–2024. Retrieved from https://geomatejournal.com/geomate/article/view/1991

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 > >>