EFFECT OF DIAGONAL FORMATION OF PLATE PERFORATIONS ON THE TYROL WEIR DISCHARGE COEFFICIENT VALUE
Keywords:
Tyrol weir, Diagonal Formation Screen, Circular Perforated Plate, Discharge CoefficientAbstract
The purpose of this research is to find the equation of discharge coefficient (Cd) on a tyrol weir with diagonal circle filter sieve holes. To determine the discharge coefficient (Cd) a physical model test was conducted in laboratory by creating an open channel with a width of 40 cm and a length of 797 cm. Hole variations were made with diagonal formations with diameters of 6, 8, 10 and 12 mm, screen slope θ = 20°–45° and flowrate Q = 453–4 481 cm3∙s-1. The physical test showed that the water flow for the diagonal holes was about 140% more than for the screen with a straight formation of holes. The value of the discharge coefficient (Cd) constant is directly proportional to the froude number (Fr), the slope of the filter (θ), the ratio between the distance of the filter to the hole diameter (x/d) and inversely proportional to the specific energy (E). The value of the discharge coefficient constant is directly proportional to the Froude number, the slope of the filter, the ratio between the distance of the filter with the hole diameter and inversely proportional to the specific energy. After analysis, the results obtained that the value of the discharge coefficient constant (Cd) ranges between 0.15-2.75, then the accuracy of the model test obtained RMSE = 0.096, MAE = 0.074, NSE = 0.836.
Published
Versions
- 2021-11-30 (2)
- 2021-11-30 (1)